San B

Here's a mat named San-B built for Nicolas Wolken. Many of you may know Nico already as a professional snowboarder, Patagonia Ambassador and co-founder of Korua Shapes snowboards. As well as being a hugely talented snowboarder, he is an excellent surfer and has developed a love for the mat.

Nico says:

“I grew up in the Swiss Alps with snowboarding as a big influence, but my interest in surfing was sparked when my Australian Grandma sent me and my brothers a surfing VHS. Although I pretty much only got to surf during summer vacations. I’ve always been in to activities that offer a different sensation from snowboarding so I liked climbing and when I saw the movie “Come hell or high water” by Chris Malloy, it really got me interested in body surfing.

I spent a couple of summers trying to figure it out which was a blast. Then a few years ago I met Rasta at a Patagonia Ambassador summit in California. I already admired his board surfing and saw him ride a surf mat. The waves were small but long and he was just flying down the line having the best time. I couldn’t believe my eyes, the speed he generated just blew my mind! He was getting the best and longest waves jumping over people! He actually let me and others have a go but I didn’t get it instantly. However after witnessing his surfing I knew I had to figure this out as it looked so fun!”

— Nicolas Wolken

Since then Nico has scored a couple of mats, most recently a G-Mat RFT which he has ridden a few times now and has become his favourite ride. He had already got on the list for a custom when he bought the RFT so was already clear on what he wanted... Something for the juice! A Nouveau Racer was the obvious choice and is a perfect quiver mate for the RFT.

Nico was keen on a mat that cuts-back into the pocket and turns off the bottom so we went for positive elastic rocker. The internal venting is restricted to make San-B more wheezy which along with the 200d deck will keep the mat relatively stable when things get hectic!

As for the colour... A nod to snow and the Yin to the RFTs Yang.

I'm looking forward to seeing what goes on with Nico and San-B. Have fun!

Cheers

G

Sandpiper

Say hello to G-Mat 270 (AKA "Sandpiper"), a 200/70 Ute built for Sam Arkinstall.

Sam is a UK based surfer who is fairly new to mats but he is friends with Ethan Greenwood who has been riding mats for a few years now so it was only a matter of time.

Sam came with a clear colour scheme in mind for his mat so I had to crack out the dye. Lighter colours like those towards the tail can often be a bit fickle but I think we've got away with it!

I asked Sam about his journey into mats. He said:

“My journey in to mats started with my friend Ethan who introduced me to it. I had never seen or heard about it before. I was definitely sceptical about it at first , then when I used a mat for the first time the feeling of riding a wave was very different to any form of surfing I have done before!

It’s nice for me because I can add another Watersport to my quiver as already windsurf, surf, paddleboard, sail and wakeboard. I like to think I am an all round waterman, so I have a water sport for near enough every weather condition.

My go to places are usually Crooklets or Widemouth but recently moved to North Devon so been exploring some spots round there.

There’s not much meaning behind the name really. basically went on a long google search around Monterey bay as that’s where the colour scheme derives from, and found there was a movie called Sandpiper filmed there and though it sounded cool.”

— Sam Arkinstall

I was stoked to build a mat named Sandpiper myself as it was my Dad's CB Radio handle when I was a kid!

So back to this Sandpiper, as I say we have gone with a 200/70 free-breather. This offers stability in the deck so the mat maintains it's shape more readily which will be useful for Sam as he develops as a mat rider whilst maintaining the ability to morph responsively to the wave and rider input. Sam has gone for a free elastic rocker for versatility.

Have fun Sam. I hope we get to share some waves one day.

Cheers

G

Tximista

How do pirates know that they're pirates? They think therefore they ARRRRGH! (There's a lot wrong with Descartes but that's a solid gag).

Anyway, say hello to Tximista, an RB-JMC built for French all round waterman Benoit Moreau. For those unaware, Benoit absolutely charges riding a range of craft including mats and I am stoked to see him on one of my creations. A few years ago, Benoit lost an arm in an accident which brings some challenges to mat riding that he overcomes seemingly effortlessly. I asked him about his journey into mat surfing. Here's what he said:

“I arrived in the world of the surfmat thanks to my good friend Régis who has been practicing it diligently for a very very long time. Before my accident I practiced the bodyboard, it was unfortunately very complicated since. And then one day I tested the surfmat and the sensations were incredible. This machine is literally dedicated to giving you pleasure. There are never bad surfmat sessions. And since then I always have a surfmat with me whether at home or abroad. And I’ve never been disappointed with that . From very hollow shorebreak going through a reef beeak like in Makaha or on very soft and bumpy mellow waves where we always have the banana.”

— Benoit Moreau

Well Tximista is certainly a machine built for pleasure. We narrowed the aspect ratio more than usual as Benoit reaches across the mat to grab the opposite rail but have kept the key characteristics of the RB-JMC to maintain that hovercraft feel. We have added a bungee to fit a leash and also used the same pool toy valve I fitted to a mat named Green & Blue which went down to Oz. The feedback on that valve is almost unnervingly positive so I had no qualms about fitting one into Tximista to make inflation/deflation easier with one hand. Tximista is a 70/70 super-free-breather with neg elastic rocker.

So why did Benoit pick the name Tximista? Because it's Basque for Lightning Bolt.

Nice.

Have fun Benoit! Hopefully we'll get to share some French waves one day.

Cheers

G

Nepenthe

This is a mat I've been really excited to build. Chris Cravey is a super talented surfer and mat rider hailing from Santa Cruz. You have almost certainly seen him in the Jack Coleman mat flick, Circum Vehicle. Check the opening few waves of Chris riding his VPT mat

Chris is also a very skilled surfboard shaper so knows what's what. I always love building mats for shapers/designers. They share my nerdy interest in all the hydrodynamics and technical aspects of design. They also ask the kind of questions that prompt reflection and new thinking as well as sniffing out bullshit so you have to be legit.

Anyway, on to the mat. Chris has gone for an RB-JMC 70/70 Super-free-Breather with neg rocker. Not really a surprise given his talents. Chris wants as much control in his hands as possible (including the decision to let go). We had a lengthy discussion around the scaling and tinkering which I'm fairly certain we have right. We shall see!

Chris has named his mat "Nepenthe" saying:

“As far as the name goes, it’s pretty hard to have a mat session and walk away without a smile. As I’ve ridden more of the lighter weight/free breather ones I’ve had these feelings on waves that no other surfcraft has offered and it’s totally consuming. Nepenthe is known as a mystical drug that wards off sorrow or pain and somehow thats stuck in my head lately so it seemed like a good fit. How can you think about anything when you’re blissed out of your mind flying across a wall of water on an air bag?”

— Chris Cravey

Perfectly put. What a name! I can't wait to see how Chris and Nepenthe get on. Chris has a trip on the horizon so let's see how they go.

And finally if you haven't, do watch Circum Vehicle on YouTube. And if you have, watch it again!

Cheers

G

---

FEEDBACK - Sept 2023

Ho'onalu

Here is a mat for Kevin Warren which he has named Ho’onalu. Kevin says “It is one of the Hawaiian words for meditation. It means literally - 'to make like or be like a wave’”.

Kevin has a really interesting story about his journey into mats and his amazing career:

“I’m 63 and grew up San Diego North county and started surfing at age 10 learning at Swamis, Cardiff and Seaside reefs as well as Del Mar and Blacks beach. Started going to Baja in my teens driving down to the legendary point breaks of the seven sisters. I also flew Hang Gliders in my teens as well soaring the cliffs in La Jolla above Blacks and in the mountains of the San Diego backcountry. ( I built a hang glider out of bamboo and plastic in 1972 for a 6th grade science fair project )

In my 20’s with my love of aviation I received all my flight ratings as I wanted to become an airline pilot. Once I was a commercial pilot I started taking friends on exploratory flights into Baja looking for remote unridden point breaks. We found many and I got good at landing on beaches and islands where there were no roads. Nobody was doing anything like this so I started a company called Baja AIrventures that offered all-inclusive packages flying surfers into spots like Isla Natividad, Seven Sisters and Scorpion Bay as well as many spots I will not name. I’ll never forget taking Tom Carroll and Mike Stewart on a photo shoot for surfer magazine in the early 90’s. I had never really seen what a body boarder could do and Mike blew me away. ( as did Tom but Mike rode deeper in the barrel )

I’ve windsurfed, kite boarded, body surfed and hand planed as well as I started recently wing foiling. My surf buddy showed up with a 4th gear Flyer surf mat and let me try it about 6 years ago. I was hooked. Felt like a kid again. Pretty pure form of surfing. I’ve done some dual sport motorcycle trips into Baja with my surf mat and traveled and matted in Spain’s Basque coast. Perfect travel wave vehicle. Fits in my carry on. Not really possible with anything else. I still own Baja AIrventures which is now Baja Spirit. www.bajaspirit.com ) 34 years later.”

— Kevin Warren

With pointbreaks in mind Kevin came with a clear idea of what he wanted in the form of a 70/70 RB-JMC with negative elastic rocker. Having considered internal venting options, he has opted for a standard free-breather which allows an easy flow of air within the mat to maximise speed at lower inflations. Kevin was keen on the white mat/brown grip that Steve Halpin and Maddie Gordon have had previously. With the black logo and a black “Ho’onalu” motif added to the rail its a mat I really like the look of. If this wasn’t too small for me, Ho’onalu is a mat I’d like to hang on to!

Ho’onalu is heading over to hook up with Kevin in California. I look forward to hearing about their road trips!

Have fun Kevin.

Cheers

G

More Green & Blue - Synapse

Here we have a G-Mat RB-JMC named Synapse built for Californian, Rob Belli. Rob is a very fine mat surfer who you may well have seen sharing waves with mat art master Jared Katz.

I asked Rob to tell me a bit about his journey into mat surfing. Here’s what he said:

“I got into mats about 2008 (I think, I can’t quite remember) when I ordered a mat from a shop called Wetsand in Ventura,CA. They were selling mats called Neumatics made by some guy named Dale Solmonson haha. So I ordered one but around that time Dale had some health problems and didn’t get the mat till about a year later. In the meantime I think I got a 4th Gear with denim on it for grip. But as everyone knows once you get a good wave on a mat you realize there is nothing on earth like it. What’s funny is once I got Dale’s mat it smelled so bad from the grip (even after riding it for a while) I stupidly sold it for 100.

I picked to name my mat Synapse from my experience riding mats in choppy onshore conditions. I was amazed at the feeling I experienced at the micro adjustments the mat was making to the bumps and chops at high speed and going faster and faster down the line. It was like the mat had a brain that was taking input and translating to speed.”

— Robert Belli

Synapse is a 70/70 super-free-breather with neg rocker. Rob was inspired by a mat I sent to Oz for colours although the clear grip and black logo give a different feel. As you see, Synapse has a bungee for a leash on really windy days as Rob travels to some breezy places with long swims and is keen not to lose his mat!

I'm really looking forward to feedback on this.

Have fun Rob!

Cheers

G

Green & Blue

A quick post here about a mat heading down-under. As you can see there is a different valve on this mat.

This mat is a 70/70 RB-JMC super-free-breather named “Green and Blue”. It is heading down to Byron Bay, Australia to hang out with an experienced mat rider who has a G-Mat already and gives really good feedback. Part of this was that they wanted a smaller and/or softer valve. That’s not an easy ask but I managed to ger a TPU version of a pool toy type valve which seems to hit the mark.

These can come in colours if I buy an absolute stack of them! I’m yet to decide what I think on that front though. They really do look a little pool toyish! They can be made in black apparently which would look better and might be a good opion for the BodyBag mini mats. I’m interested to hear people’s thoughts on that.

Anyway, I am looking forward to hearing feedback on the mat and the valve. Personally I really do like my usual mini-boston valves but it’s always good to have options. I certainly plan to put one into a BodyBag mini mat soon to try. The lightweight, smaller design could be perfect for that.

Anyway lets’s see. I’ve been trying out a few design ideas of late with a mat due to go out to Andrew Buck for testing.

More of that soon though. .

Cheers

G

Ellie

Say hello to “Ellie”, a Nouveau Racer built for Aussie matter Peter Abbott. Peter has been riding a mat for around 12 years having been inspired, like many of us, by the Innermost Limits of Pure Fun.

Peter lives in Northern NSW, a place with excellent waves. He has every day covered with his existing quiver, but wanted a mat for those days where things really get cooking and the local spots really light up. With that in mind we felt that a Nouveau Racer tailored to Peter was the order of the day.

Given the conditions Ellie is aimed at we went for a wheezer with a 200d deck. Ellie has free elastic rocker to offer plenty of flexibility. Peter opted for a red deck and black bottom with black grip. I have to say, I dig this look!

So why Ellie? Ellie was Peter’s old red cattle dog who loved the beach and the water. What a perfect name. I am really honoured to have been able to create the tribute to what sounds like a really special girl.

Have fun Peter. I can’t wait to hear how you and Ellie go down there.

Cheers

G

FEEDBACK - 20th Jan 2024

Mimosa

This is Mimosa, a mat built for Welshman Huw Beynon. Huw has been a mat surfer for some time and has been riding a stock G-Mat and pretty well at that. Living on the Gower in South Wales, Huw has some great mat waves on hand so when he got his deposit in for a custom mat I was over the moon!

Mimosa is definitely a step up from Huw's current ride being a 70/70 super-free-breather so much more sensitive and responsive than the 200/70 wheezer RFT that he currently rides. We discussed elastic rocker options and Huw opted for free rocker, given the wide range of conditions he will be surfing. With some very peaky waves in the mix, Huw felt a mat that would respond to hard cutbacks was handy whilst flattening nicely for the points. The bungee has also been added to cover nipping over the Severn to jump in the wave pool.

Huw has also gone for pigmented grip and logo. They say blue and green should never be seen. Well... I beg to differ.

The only downside is my spelling of Beynon! Sorry Huw... As a fellow Celt I feel suitably ashamed. Huw seemed to find my balls up funny though so all's well that ends well.

I'm going to get to surf with Huw and Mimosa in April at The Wave on Bristol. Can't wait to see them in action!

Cheers

G

Unburdened & Becoming

Here's is a mat for Mark "Tom" Underwood that I built during a week off in February.

Tom has been after a mat for a while and with the upcoming Wave meet coming up on April 16th (still a slot or two available by the way. Advanced level, 11am on the right) he was keen to get a mat with a bungee set-up for a leash. Also handy for long-swim avoidance on some of the sketchier reefs on big days. Tom is a big fan of the 70/70 neg rocker RB-JMC having been riding one exclusively for some time. He's a fine mat surfer (fine everything surfer to be honest) and really does fit the performance of the RB-JMC.

Tom has called his mat Unburdened and Becoming saying:

“It’s a song lyric line by Bon iver. A band that me sons all went to see live. It resonates with me. It’s positive and life affirming, like matting.”

— Mark Underwood

Tom has been out and about with Unburdened and Becoming in his local area of South Devon and South East Cornwall on the seemingly endless run of swell we're having. With this cold snap the Arctic camo grip is pretty appropriate!

Have fun Tom!

Cheers

G

Warchild

Here's a mat for Joe McEachern over in New England on the East Coast of the US of A. Those with eagle eyes might spot that Joe got in on the last round of builds and I was pretty surprised to see his deposit roll in. What are the odds?! Well it turned out he was stood at the beach with Ryan Kleinert when the email dropped and Ryan clocked it! Joe jumped in on the act and there you go. If only he'd been quicker. I could've shipped his and Ryan's mats together!

Anyway, Joe's first mat, Red Rider was a 200/70 wheezy Ute which he has been having a blast on. He wanted to move things on this time and "Warchild" was conceived. A 70/70 RB-JMC free-breather cut with neg elastic rocker. Perfect stable mate for Red Rider and I reckon a mat that will open things up for Joe.

Joe tells me Warchild is from the movie Pointbreak. (I watched it about a million years ago and thought it was rubbish so don't recall... Deal with it! )

So Warchild is off to the US East Coast. A pretty healthy mat scene growing over there you know. Great to see!

Have fun Joe!

Cheers

G

Pure Joy

Here’s a new mat for Josh Jacobs over in Hawaii named “Pure Joy”.  Josh has been after a new mat and managed to get in on this round, having been riding one of my mats for some time.

 Here’s what Josh had to say:

“How can I explain Mat surfing.. As someone that has been in the ocean for most of my life and have played with many different types of ocean crafts (bodyboards, surfboards both short and long, body surfing, paddle boarding, and a few others), mat surfing might be the only one that brings me back to the childhood joy that I experienced the first time I rode a wave. I really only got into it a few years ago watching one of my buddies ride his mat at a funky little wave on Maui, which is where I live. My buddy let me have a go on his mat and I was hooked after the first speedy free-flowing right that I ever had on one. After that I hit up my old friend from California [Jason MacMurray] who’s been riding your mats for sometime, and he so generously sent me one of his older mats to use. I love riding the mat in all types of waves, from reef breaks to A frame rights and lefts to longer island style point breaks. It’s always fun to see peoples reaction to how much fun I am having on such a different style of surf craft. I have surfed many times in my life, but I can honestly say that some of the sessions that stand out to me are the days that I rode my mat. I can’t wait to ride my new mat “AKA” Pure Joy.”

— Josh Jacobs

We talked about what Josh was after. The mat he had from Jason is a 70/70 free-breather Rubber Bucky. The mat is a bit under sized for Josh but still, that particular set up can be tricky in heavier and hollower waves. Josh was after something more stable to expand his matting options but still an all rounder.

With all that in mind, a Ute seemed the obvious choice. I have scaled around Josh’s existing mat (see G-Mat 83) and his body dimensions in combination as he feels happy riding it. We have gone for a 200d deck with restricted venting (wheezer) on the inside so Pure Joy will hold her shape and offer a more stable deck. Pretty nice quiver mate for his other mat named “Self-Pleasure” (Jason named it!). 

Looking forward to feedback from Josh on this build. Have fun mate!

 Cheers

 G

---

FEEDBACK - 16 February, 2023

Wu Wei

Stealth is the order of the day sometimes. This is one of those times.

Dom Davenport has been on the list and trying hard to get in for a mat for some time so I was stoked when he did. A dedicated mat surfer who has fallen hook, line and sinker for these craft and I always love to build mats for those people. Here’s a word or two from Dom:

“I have been riding mats for about 10 years, having started with standup surfing in my 30s I saw someone riding a 4GF one day whilst living in California, flying along a point break like a pelican and I knew it was for me. Since then I have almost exclusively ridden mats, although I discovered the joys of the kneelo as a compliment, particularly the displacement hull as perfected by Paul Gross. Now living back in the UK, I spend my time heading to the reefs and hidden points of the Dorset coast.

There is a feeling when riding a mat that can’t be found with any other surf vehicle, a bag of air brings the opportunity for complete integration with the wave’s energy. The lack of substance in a mat stops you from forcing things or from trying and moves you to respond to the moment.

There are no bad days on a mat and the pure joy I’ve experienced surfing them has made my life better in so many ways. I’m excited to get my hands on one of G’s mats, the RB-JMC is an evolution of surf mat design that I couldn’t miss out on trying.”

— Dom Davenport

Dom has a trip to Morocco planned so with long points in mind a 70/70 neg rocker was the order of the day. Dom wanted a responsive mat and enjoys surfing lower inflations so the super-free-breather was the obvious choice for him.

Also, a low key colour scheme as you can see. Dom also went for a bungee as living in the South East of the UK these days, trips to artificial waves are often his only option and they insist on leashes. Horrible things but needs must.

As for the name, Dom has called his new mat “Wu Wei” meaning non-action or without force which sums up the approach to mat surfing. Responsiveness as opposed to reactivity.

So as I said, Wu Wei and Dom are off to hit the points of North Africa and I really hope we get some pics!

Have fun Dom.

Cheers

G

Nephele

Here's a new mat for Nilus Mattive built back in December called Nephele.

Nephele is a RB-JMC built with negative rocker and a super-free-breather so a very fast mat. As you will notice, Nephele has an acid dyed deck.

Nilus is a fine mat surfer from Santa Barbara, CA. I asked him about his journey into mats:

“My first real surf craft was a Morey Waimea Pro body board. In 2013, I returned to my prone roots and got my first mat, mostly thinking I’d use it for junkier days. Didn’t really pull it out a whole lot.

Fast forward to 2016, when my nine year old daughter Vela got into surfing. That gave me the opportunity to start messing with the mat more often.

Now she’s 15 with the long-term goal of qualifying for the world tour. We’re in the water most days, traveling quite a lot, and I always bring a mat with me. Have had the chance to ride one all over the place — Hawaii, Indo, Barbados, the Waco wave pool, etc.

My favorite is taking a mat out when conditions are too fast and hollow for me to surf standing up. Matting is also a great way to break the tension in a lineup or simply remind yourself what the essence of surfing really is. Whenever I bring one out — whether it’s CA or Kandui — people seem genuinely stoked to see me send it on a couple.”

— Nilus Mattive

Mats certainly do help remind everyone what this is really all about.

Nephele is nearly with Nilus so I'm looking forward to getting some feedback. Rincon has been on of late so fingers crossed the swell hangs about!

Have fun Nilus and please do send a pic of you in your Tee

Cheers

G

Turbinia Down-Under

Here’s a mat headed down under to mat surfer Mike Curran. Mike is a self-confect mat addict as you can see from what he had to say when we spoke about his journey into matting:

“I am 65 and nowadays a part time Marine Engineer.

I had my first mat/surfoplane rides at Torquay, Victoria way back when 10 years old when you hired them at the front of the Torquay lifesaving club. The thrill of catching a wave has never been lost.

Wind on to 5 years ago & after 45 years as a stand up surfer, (knees getting stiff) as an avid adventure motorcyclist, (Tiger 900) went way over to the NE coastal side of Tasmania to a little known remote area and took a RedBack Surf Mat so I could have a splash, fun and a laugh and ..actually caught some waves. (And still no idea how to use a mat). I was Immediately inspired!

Then In 5 years since has become absolutely hooked! I am now a regular Matter, and have improved a lot, and also helped immensely when he met through work connections the famous NSW, SCUMM. Since then I have matted around Victoria, NSW, even Long Island in New York, Mentawis, and recently South Central Atoll Maldives!

To add to my current mat quiver I needed a mat with more bite and turning ability to use in grungier waves. I’m ready to welcome my new G-Mat Ubercat. My aim is to eventually position on the inside of Stand-Up surfer and call them, for your wave…When you can do that you know ..you know how to surf a mat !

I have named my mat “Turbinia” which was the name given to the very first experimental & extremely fast ocean going steam turbine ship from 120 years ago.”

— Mike Curran

So then, on to Turbinia. She has a very specific place in Mike’s quiver being specialised to surfing hollow and gruntie waves. After some discussion we settled on the idea of an Ubercat. We went for free-breather venting to maximise responsiveness but combined with a 200/70 construction so a stable deck but responsive morphing characteristics on the go. We have also gone with a positive elastic rocker which I have tried to capture in the photo’s below. The camera never really shows this that well.

Turbinia is all black with grey/black Sikaflex EBT grip and white branding which pops nicely I think.

Mike has also gone for a classic G-Mat Apparel Tee. Thanks for the support Mike!

Have fun with your new ride Mike!

Cheers

G

---

Feedback - 21st May, 2023

She’s had about 5 surfs. Main points In point form. 🤔

1. Seems to be much easier to bend and paddle through broken waves than my others.

2. Yes gripping better on the bottom turns and seems to point and turn easier than others.

3. Is faster!

4. Must have it more than 90 degs fold over for best inflation.

5. Loves a late drop.

6. Deck grip very good.

The Widow Maker V6

This mat is an Ubercat build for one of the English South Coast’s prone stalwarts, Mike Steele. Mike has been a body boarder for many years, seeking and charging some of the phenomenal hidden gems on the Jurassic Coast. Mike says:

“Got the bug when I was 10 when my dad bought me a polystyrene board for the summer and then progressed to the Mach 7-7 and was a devout Morey fan until they sold to Mattel. Grew up surfing Bournemouth Pier, then discovered the local reefs and was completely sold on boogin’. One of the spots was in an M.O.D. training range and we got arrested for trespass for walking back from the break after we had been told to get out by the range boat. In and out of court for two years and the day before judgement they dropped the charges. The whole thing was very underhand by the M.O.D., false evidence etc. Anyway, after that ordeal we decided to buy a boat so we would never have this problem again and we discovered a few spots that were literally made for bodyboarding. We had a few eventful boat trips in the surf, one in particular was witnessed on quite a big day, my mate driving hit a big wave too fast and we were apparently fully vertical and the ‘prop was 10ft clear of the water’. How we all survived is beyond me and hence we named the boat ‘The Widowmaker’. Most of our crew has their own boat now, mine is the Mk 5, and now the mat is the Mk 6. Re: board progression, had many boogs over the years, and I know the guy who imports NMD and VS and he is very pally with Nick Mezeritz so been getting customs with experimentary tails for about 10 years. Then saw Noah Lane in Ireland riding Guy Butcher wooden boards and went down that route, again experimenting with shapes with Guy. 3 boards in and started following the fringe element and saw some clips of fellas on mats going exponentially fast and have been trying to get my grubby mitts on one of yours for a couple of years. And now I have one!”

— Mike Steele

Mike and I spoke about the amount of adjustment needed to switch from a bodyboard/paipo to a mat. He is up for the challenge!

So on to the mat, WMV6 is a wheezy 200/70 Ubercat with positive elastic rocker so has good hold and is well set up for tight S-turn surfing on slabby waves and wedges. Mike has gone for the bungee leash option as a lot of the waves he surfs involve tricky swims if losing the mat. You will notice the 2-tone blue and white bottom skin and logo. This was based on a design Mike sent me and we’re pretty stoked on how it’s come out.

Widow Maker V6 is with Mike now and with a winter of south swells looking to be on the cards we’re pretty hopeful that they will get plenty of action!

Have fun Mike. Can’t wait to hear about your journey into matting!

Cheers

G

Z-Brah

A bit of a weekend project here building a mat for myself. It was flat and absolutely freezing cold so a warm workshop and podcasts seemed very appealing. I've had a big hole in my quiver for some time now with a Nouveau Racer named "Steady Eddie" and a RB-JMC Ultralight named "Featherweight Fordy" and nothing in between. Basically, if it was ether solidly overhead/heavy or upto shoulder high glass I was golden. The 80% in between I was having to work a lot more and poor FF had been taking a right pounding!

So then, on to this mat. It's called "Z-Brah" because the name makes me laugh and works however you pronounce "Z". Z-Brah is a 70/70 Ubercat. Standard free-breather with positive elastic rocker to get tight on the turns. I've also added a bungee for leash attachment for night surfs and wave pools so all in all... I'm covered! Weight off my mind to be honest!

I've actually finished another mat before this one for Mike Steele which I'll post dreckly.

We have waves at the mo so Z-Brah should see some action pretty soon.

Cheers

G

---

UPDATE/FEEDBACK 06/03/2023

Well after all that I sold Z-Brah to Chris Cavey over in Santa Cruz. I ended up building my son and myself mats over Christmas and needed money for a trip so with heavy heart let Z-Brah go.

Here’s feedback from Chris. It’s good to see that the Ubercat does what it says on the tin.

---

UPDATE - APRIL 2024

A little edit of Chris Cravey riding Z-Brah at the Kelly Slater wave pool.

Crumbs!

One for a test pilot here. James Tanner rides a mat really hard and really, really well so is the perfect person to test this design concept. This mat which he has named “Crumbs” (a name which came to him during the trance-like meditative state that is driving home after a day at work) is a 70/70 RB-JMC.

Crumbs is built to the usual favoured configuration for this model with negative elastic rocker and venting, but the latter has been ramped up. I have increased the venting to make this a super-free-breather sucking a menthol mint! It’s going to be interesting to hear how James goes. He rides with low air so I imagine he will find the ride to be super responsive.

I hope one of those Noosa cameras points in James’s direction once Crumbs gets down there.

Have fun James!

Cheers

G

Blue Darr

This is G-Mat 244 (AKA Blue Darr), a mat built for the supremely talented Nick LaVecchia.  If you aren’t familiar, Nick is an amazing photographer hailing from Maine on the US East Coast.

I spoke with Nick some time ago about mats after he was pointed in my direction by Trevor Gordon and Will Adler. We spoke about mats and Nick signed up for my mailer and, after a few miss-outs, managed to nail a spot this time around.

 Nick is a very experienced surfer and spoke about his journey into mats:

“I am a lover of the ocean and all ways of riding waves. If I’m not out swimming and making images, you can usually find me with the van loaded up with cameras, housing, fins, wooden log/single fin/fish and a mat of some sort for all kinds of conditions.
I’ve found myself never wanting to be caught at the beach without a pair of flippers and a mat. That first started back in the 2008 or so when Dave Rastovich came for a Maine visit and had his Krypt mat. Once I witnessed him lock into a nice long wall and fly by me with a smile....that was it.

Then in 2010 on a trip to Nicaragua with Tomo, he had one of his Dad’s mats rolled up in his board bag. After that trip ended he left the mat with me, and I’ve been heavily hooked since.

Headed into Winter here in Maine, my favorite time. Looking forward to getting this new mat into some waves with energy while the snow flies. Nothing like skimming along the face of a wave through a blizzard Nor’easter.

Thanks for all you do Graeme. Hope we can share a few waves in the Atlantic someday.”

— Nick LaVecchia

So when we got to talking it became clear that Nick knows how to ride a mat, enjoying the feel and performance of riding with lower inflation levels. We settled in the end on a RB-JMC with super-free-breather venting and negative rocker. Full steam ahead! Nick was keen to look at a teal colour scheme for the bottom skin and the logo. Acid dye can be funny stuff and pigmenting sealants for the logo is far from an exact science so we went into that from a “let’s have a go” perspective. All in all… pretty pleased with the match! 

I’ve already had some feedback from Nick from his initial session where funnily enough he bumped into Ryan Kleinert on his new mat! Nick said:

“Just got out of the water with Ryan. Some big beautiful rights this morning. Had an amazing vision of him coming flying around the whitewater on big overhead barreling right. So good. That pink mat

I got a few amazing rides. Totally different feel. Waaaay lighter and way faster on the water. The hold felt really nice. I sideslipped down the face on a couple late large ones(my own wrong-doing) then it grabbed and really locked in. The wave was really fast this morning. Just felt amazing to make a few and beat the section with not a ton of effort. Just skimming across the top!”

— Nick LaVecchia

Music to my ears right there! I love building mats for people who take the time to learn to ride them well. It is easy to pump up a mat, jump on it and catch waves, but it is hard and takes true commitment to explore the nuance of these craft. A lifetime of learning which gets into your bones… Just ask Nick!

Thanks again Nick. Here’s to sharing waves one day.

See Nick’s amazing work on Instagram @nick_lavecchia at his website at nicklavecchia.com and in surf mags everywhere.

Cheers

G

Starchaser

This is a mat built for Ryan Kleinert from Maine in the US of A. Ryan has got pretty into mats… Like REALLY into mats. And why wouldn’t he?!

Ryan says:

“I slept on mats for way too long but when I started mat surfing, I felt the magic immediately and become completely and utterly obsessed. I started surfing boards and body surfing over two decades ago as a grom in NJ but have called New England home for most of my adult life. I have always been drawn to alternative surf craft and experiencing waves in different ways.

Surfing for me is a spiritual pursuit that connects me deeply with the wildness of the ocean and intimately with the energy of waves. Mat surfing has been transformative and has completely transcended surfing for me. The feeling that I was seeking while surfing on a board is found over and over again on a mat. Surfing is not about what I can do to a wave but about experiencing how each wave feels and what it has to offer: unhindered speed, an intimate feeling of connection, sensations defined by the uniqueness of each wave. As you know well, mats facilitate this better than any other surf craft.

I named this mat “starchaser” for the magic portals that it will open and the infinite stoke and speed it is destined to cultivate.”

— Ryan Kleinert

Well I’m certainly hopeful those portals will open! Starchaser is certainly built with that in mind. The internal gubbins are set for easy movement of air with super-free-breather venting and being a 70/70 RB-JMC Starchaser has a perfect balance of hold and glide with down-the-line speed helped out with negative elastic rocker. All in all, not the easiest of rides but an extremely rewarding one once tamed (the rider I mean, not the mat!).

I’m really looking forward to hearing from Ryan once her gets Starchaser in the water. In all there are 3 mats going to New England in this batch. There’s a bit of a boom over there with the locals seemingly being right on it to get in on the emails I send out.

Have fun Ryan!

Cheers
G

---

Feedback - 17 November, 2022